Skip to main content

Just In

New Zealand Geothermal Exploration Expands into Taranaki and Waikato Regions

Geothermal Exploration in Taranaki and Waikato: Unlocking New Energy Opportunities in New Zealand New Zealand is expanding its geothermal ambitions beyond the country’s established development zones. Two Māori-led exploration projects in Taranaki and South Waikato have received a combined NZ$5.95 million in government grants to investigate previously underexplored geothermal resources and assess their potential to support regional growth, energy resilience, employment, and decarbonisation.  The initiatives reflect a broader shift in geothermal development. While New Zealand’s geothermal industry has traditionally focused on high-temperature resources suitable for electricity generation, the new projects will also examine lower-temperature heat that could serve industrial, agricultural, commercial, and community applications. Government Funding for Two Exploration Projects The New Zealand Government has allocated NZ$3 million from the Regional Infrastructure Fund to the Taranaki Ge...

Ethiopia’s Corbetti Geothermal Project Advances Renewable Energy Development

Corbetti Geothermal Project: Ethiopia’s Ambitious Plan to Harness Clean Energy for Growth

Ethiopia’s Corbetti Geothermal project has taken a significant step forward after signing a contract with the United Kingdom’s Marriott Drilling Group to drill up to four exploration wells near Shashemene in Oromia. The agreement marks the beginning of a new phase for one of Africa’s most closely watched geothermal developments and could help Ethiopia diversify its electricity supply beyond hydropower.

The project is being advanced by Taranis Operations Ltd, which recently acquired a majority interest, alongside the Private Infrastructure Development Group (PIDG), which retains an approximately 40% minority stake. PIDG has also committed an additional USD 7.2 million through its project-development arm, InfraCo Africa Business Development Limited.

The drilling programme is expected to begin early next year after a rig arrives at the Corbetti site and final preparations are completed. The initial exploration campaign will determine the quality, temperature and productivity of the geothermal resource. If the resource is confirmed, the project’s first development phase is expected to include production and injection wells, a steam field and a 50MW power plant. A later phase could increase capacity to 150MW.

The scale of the proposal makes Corbetti more than a single power project. It is also a test of whether private capital, development finance and government cooperation can bring a large greenfield geothermal project in Africa from exploration to commercial operation.

Ethiopia’s changing energy challenge

Ethiopia has one of Africa’s largest populations and has experienced rapid economic and urban growth. As homes, businesses, factories and public services expand, the country needs more reliable electricity and broader access to the national grid.

Hydropower currently dominates Ethiopia’s electricity system. More than 95% of the country’s electricity comes from hydropower, according to the project’s supporting information. This has allowed Ethiopia to produce relatively low-carbon electricity, but it also leaves the energy system heavily exposed to rainfall and water availability.

Climate change makes that vulnerability more important. Changes in rainfall patterns, prolonged droughts and shifting seasonal conditions can affect reservoir levels and electricity generation. When hydropower output falls, households and businesses may face power shortages, interruptions or restrictions on electricity use.

Geothermal power offers a potential source of diversification. Unlike hydropower, it does not depend on river flows or reservoir levels. Unlike solar and wind power, it can potentially provide electricity continuously, day and night, subject to the performance of the wells and generating equipment.

This makes geothermal energy especially attractive as a source of baseload power. A strong geothermal resource could provide a stable foundation for the national grid while reducing pressure on hydropower during dry periods.

The importance of the Corbetti Caldera

The Corbetti project is located in the Corbetti Caldera near Shashemene in Ethiopia’s Oromia region. A caldera is a large volcanic depression formed after a volcanic eruption or the collapse of land above a partially emptied magma chamber. Such areas can contain significant underground heat and naturally fractured rock systems that enable hot water and steam to circulate.

The geothermal resource beneath Corbetti has been investigated for many years. The project is now moving from development studies and investment preparation toward exploration drilling. This transition is crucial because surface surveys and geological models can suggest the presence of heat, but only wells can confirm whether the resource is commercially usable.

Exploration wells are designed to answer several technical questions:

- How hot is the underground resource?
- How deep is the productive reservoir?
- How much water or steam can the wells produce?
- What is the chemical composition of the geothermal fluid?
- How quickly can the reservoir be replenished?
- Can the resource support long-term electricity generation?

The answers will determine whether the proposed 50MW first phase is technically and financially realistic. They will also shape the design of the production and injection system.

Drilling up to four exploration wells gives the project several opportunities to test different parts of the geothermal field. A single unsuccessful well does not necessarily mean that a geothermal resource is unusable, because underground conditions can vary considerably over short distances. Multiple wells can provide a clearer picture of the reservoir and help identify the most productive zones.

From exploration to electricity

The proposed project would be developed in stages. The first stage is exploration drilling. During this period, the project partners will gather geological, temperature, pressure and flow data.

If the results are positive, the project would move toward production drilling. Production wells would bring hot geothermal fluid to the surface, where heat would be used to produce steam or another working fluid for electricity generation. Injection wells would return cooled water to the underground reservoir.

The steam field would connect the wells to the power plant. In a conventional geothermal system, hot water or steam is transported through pipes to turbines. The pressure and temperature of the fluid drive the turbines, which turn generators and produce electricity.

After energy has been extracted, the cooled geothermal fluid is generally reinjected underground. Reinjection helps maintain reservoir pressure and reduces the need to dispose of large quantities of hot water at the surface.

The first phase is expected to support a 50MW power plant. A second phase is planned to increase total capacity to 150MW. The final output will depend on the wells’ performance, the reservoir’s long-term behaviour and the infrastructure constructed on site.

A 150MW geothermal development would be a substantial addition to Ethiopia’s electricity system. It would not solve all of the country’s energy challenges, but it could provide dependable renewable electricity to complement hydropower and other sources.

A milestone for private investment

Corbetti is notable because it is intended to become one of the first geothermal projects in Africa developed from the ground up with private capital. Geothermal projects often face difficulties attracting investment during the exploration stage because drilling is expensive and the underground resource remains uncertain.

Investors may commit large sums before knowing whether a commercial power plant can be built. A dry or unproductive well can represent a major financial loss. This risk is one reason public finance institutions such as PIDG can play an important role.

PIDG has supported Corbetti for more than a decade, helping the project attract investment and prepare for exploration drilling. Its additional USD 7.2 million equity contribution is designed to support the next phase alongside Taranis.

Taranis is taking the lead in the project’s exploration and development. The company describes itself as an impact-investment vehicle focused on sustainable energy, carbon management and nature-based solutions. Through its Energy for Africa division, it aims to install 1GW of capacity across Africa by 2030.

The partnership combines different forms of expertise. Taranis brings industrial and investment capacity, PIDG provides development finance and project support, while Marriott Drilling Group brings specialised drilling experience. The Ethiopian government and Ethiopian Electric Power also have important roles in enabling the project.

Such partnerships can help address the financing gap that often affects renewable infrastructure in emerging markets. They can combine commercial discipline with development objectives and public-sector coordination.

Why drilling is the decisive step

The signing of a drilling contract is important because exploration is the point at which the project’s geological assumptions will be tested directly. The drilling programme will provide evidence that cannot be obtained from surface studies alone.

Geothermal drilling is technically complex. Wells may extend several kilometres beneath the surface and must withstand high temperatures, pressures and chemically aggressive fluids. Equipment must be able to operate safely in difficult conditions, while drilling teams must interpret geological information as the wells progress.

The choice of Marriott Drilling Group reflects the importance of specialised experience. The company is described as the largest onshore deep-drilling contractor based in the United Kingdom, operating more than 25 drilling and workover rigs. It provides services in geothermal, water, mining, oil and gas, and specialist scientific drilling.

A safe and successful drilling campaign will require detailed planning. Roads, well pads, water supplies, fuel, equipment storage, worker accommodation and environmental controls must all be arranged. The project team will also need to manage local engagement and coordinate with authorities.

The arrival of the drilling rig will therefore be both a practical and symbolic milestone. It will signal that Corbetti is moving from a long period of planning toward physical development.

Geothermal power and energy security

For Ethiopia, the most important benefit of Corbetti could be improved energy security. The country has made major investments in hydropower, but a diversified electricity system is better equipped to manage climate and operational risks.

Geothermal power can complement hydropower in several ways. During periods of strong rainfall, hydropower can provide much of the electricity supply while geothermal plants operate steadily. During droughts or low-flow periods, geothermal generation can help reduce the pressure on reservoirs.

Geothermal power can also support grid stability. Because it can operate continuously, it may provide a dependable supply around which variable sources such as solar and wind can be integrated. This could become increasingly valuable as Ethiopia expands its renewable-energy portfolio.

Reliable power is essential for economic development. Manufacturers need electricity for machinery, cold storage and processing. Hospitals require power for medical equipment. Schools, telecommunications networks and digital services also depend on a stable grid.

Access to more reliable electricity can support job creation and improve productivity. It may also reduce the use of diesel generators, which are expensive and produce greenhouse-gas emissions and local air pollution.

The benefits of Corbetti will depend on its eventual connection to the grid and the affordability of its electricity. A technically successful project must still provide power under a commercially viable agreement.

Climate resilience and emissions reduction

Ethiopia has committed to reducing greenhouse-gas emissions by 70.3% below a revised business-as-usual pathway by 2035. Expanding renewable electricity is an important part of achieving that ambition.

Because geothermal plants use underground heat rather than coal, oil or natural gas, they can generate electricity with relatively low operational emissions. Their emissions profile depends on the geology and plant design, but geothermal power is generally considered a low-carbon source.

The climate benefits extend beyond direct emissions. Reliable renewable power can support the electrification of transport, cooking, industry and buildings. It can also reduce the need for fossil-fuel backup generation during periods when hydropower output is limited.

Geothermal energy may be particularly valuable in a climate-constrained future because it can deliver renewable electricity without requiring large reservoirs. Hydropower will remain central to Ethiopia’s energy system, but geothermal generation could help reduce the effects of changing rainfall patterns.

The project’s climate value should nevertheless be assessed across its entire life cycle. Construction, drilling, steel, cement, transport and equipment all require energy and materials. Strong environmental management can ensure that the long-term benefits outweigh the impacts of development.

 Economic opportunities

A successful Corbetti project could create economic opportunities at several levels. The drilling phase will require workers, transport services, equipment suppliers, security, catering and construction support. Later phases will need skilled staff to operate and maintain the wells, steam field and power plant.

Local communities may benefit from employment and procurement if the project establishes clear policies for local participation. Training programmes could help residents gain technical and administrative skills that remain useful beyond the project itself.

The development may also encourage supporting businesses. Roads, communications, accommodation and other services could improve as activity increases around the project area. However, these benefits will depend on planning and on the fair distribution of opportunities.

Large infrastructure projects can also create pressures. Increased traffic, land requirements and competition for water or other resources may affect local residents. Community engagement should therefore begin early and continue throughout construction and operation.

A transparent approach to land access, compensation, employment and environmental monitoring can help build trust. Communities should know what benefits are available, what risks have been identified and where to raise concerns.

Environmental and social responsibilities

Geothermal energy is renewable, but it is not automatically without environmental impacts. Drilling sites, roads, pipelines, power plants and transmission infrastructure can alter land use and affect habitats.

The project will need to manage several potential concerns:

- Disturbance from drilling, vehicles and construction activity.
- Changes to land, drainage and vegetation.
- Disposal or reinjection of geothermal fluids.
- Possible release of gases naturally present in geothermal reservoirs.
- Noise and visual effects from machinery and pipelines.
- Risks associated with induced seismicity.
- Effects on water resources and nearby communities.

Environmental assessments and operating permits should establish requirements for monitoring and mitigation. The project’s success should be measured not only by megawatts produced but also by compliance with environmental and social commitments.

Geothermal fluids can contain minerals and gases that require careful handling. Reinjection systems must be designed to prevent contamination of shallow groundwater and surface water. Well casings and cementing must be constructed to protect geological formations and water-bearing zones.

Induced seismicity is another issue that requires monitoring. Changes in underground pressure caused by production and reinjection can sometimes trigger small earthquakes. A traffic-light system, in which operating conditions are adjusted in response to seismic activity, can help manage this risk.

Good environmental management is also essential for investor confidence. Clear standards reduce uncertainty and help demonstrate that geothermal projects can be developed responsibly.

 The significance of Taranis and PIDG

The involvement of Taranis and PIDG gives Corbetti an international financial and institutional dimension. Their partnership reflects the growing interest in Africa’s renewable-energy potential and the need for investment models that can manage early-stage development risk.

PIDG has operated for 25 years and has committed billions of dollars to infrastructure projects in sub-Saharan Africa and South and Southeast Asia. Its model is intended to mobilise private investment in sustainable and inclusive infrastructure.

Corbetti fits that mandate because it combines climate objectives with economic development. The project could provide electricity to homes and businesses while helping Ethiopia reduce its dependence on a single dominant generation source.

Taranis’s involvement may also bring a longer-term industrial perspective. The company says it is not operating merely as a conventional investment fund but as an active operator focused on sustainable energy and long-term impact.

For the project to succeed, financial support must continue beyond exploration. Commercial lenders and investors will eventually need confidence in the resource, power-purchase arrangements, grid connection, construction costs and regulatory environment.

The exploration wells will therefore influence not only technical decisions but also the project’s ability to reach financial close. Positive drilling results could unlock the next round of investment, while disappointing results could require redesign or additional exploration.

Ethiopia’s wider renewable-energy strategy

Ethiopia’s energy future is likely to include a combination of hydropower, geothermal, solar, wind and potentially other technologies. Each source has different strengths and limitations.

Hydropower can provide large volumes of electricity and storage, but it depends on rainfall and can involve major environmental and social impacts. Solar power is increasingly affordable but varies with daylight and weather. Wind resources can be strong in certain areas but also fluctuate.

Geothermal power occupies a distinctive position because it can provide continuous generation from a domestic resource. Its main disadvantages are high upfront drilling costs, geological uncertainty and the limited number of locations with commercially attractive conditions.

A balanced electricity system can use these technologies together. Hydropower may provide flexibility, geothermal may provide steady generation, and solar and wind may add low-cost variable energy. Transmission expansion and storage can further improve system reliability.

Corbetti could help Ethiopia develop the technical and institutional capacity needed for this diversified approach. Lessons from drilling, regulation, financing and community engagement could be applied to other geothermal prospects.

The road ahead

The immediate next step is the arrival of the drilling rig and completion of site preparations. Exploration drilling is expected to begin early in the new year, according to the project announcement.

The coming months will reveal whether the project can move from ambition to evidence. Successful wells would provide information about the resource and could support the design of the proposed 50MW first phase.

The project team will then need to undertake detailed feasibility studies, secure the necessary permits, finalise financing, develop the steam field and arrange the electricity connection. Each stage carries its own technical and financial risks.

A second phase could eventually expand the project to 150MW, but that target should be viewed as a long-term objective rather than an immediate outcome. Expansion will depend on the productivity of the resource and the success of the first plant.

The drilling campaign will also test the relationship between international developers, public institutions and local stakeholders. Strong coordination will be needed to maintain momentum while protecting environmental and community interests.

A potential landmark for Africa

The Corbetti Geothermal project stands at an important intersection of energy security, climate resilience and economic development. Ethiopia needs more electricity, but it also needs a system less vulnerable to changing rainfall and hydrological conditions.

Geothermal power cannot solve every challenge. It requires expensive exploration, specialised drilling and careful reservoir management. Yet it offers a rare combination of renewable energy, continuous generation and reduced dependence on weather conditions.

The contract with Marriott Drilling Group marks a tangible advance. Four exploration wells could confirm whether Corbetti has the resource needed to support a 50MW plant and ultimately expand toward 150MW.

If the project succeeds, it could become a reference point for private geothermal development in Africa. It would demonstrate that development finance, private investment, government support and specialist engineering can be combined to unlock difficult renewable-energy resources.

More importantly, it could provide Ethiopia with reliable electricity that complements hydropower and supports long-term economic growth. The project’s success will depend on what the exploration wells reveal, but the decision to begin drilling is itself a major step toward turning Ethiopia’s underground heat into a practical source of power.


Comments

Popular posts from this blog

Eavor Demobilizes Rigs in Geretsried: What It Means for Closed-Loop Geothermal Investors, Heat Markets, and Project Risk

Eavor Demobilizes Rigs from Geretsried: What It Really Means for Closed-Loop Geothermal For three years, two drilling rigs on a farm estate near Geretsried, a Bavarian town about 40 km south of Munich, stood as the symbol of the world's most ambitious closed-loop geothermal experiment. Now in October 2026,  Eavor Technologies, the Calgary-based developer of the Eavor-Loop, has told the town and its heating utility that both rigs would leave the site . The company said keeping idle rigs and specialist services on site was costly, and that releasing them would help put the project in the strongest position to continue with Loop 2 once its commercial structure is reworked . On the surface, this is a logistics decision. Underneath, it is one of the clearest signals yet about where first-of-a-kind geothermal technology stands, and how hard it is to turn a technical proof into a bankable business. This article explains exactly what happened, what the move means and what it does not mean...

"GE Hitachi Nuclear Energy, OPG, SNC-Lavalin and Aecon Sign Historic Contract for Deployment of Groundbreaking Small Modular Reactor at Darlington Nuclear Project Site"

image source:(unsplash.com,Jakob Madsen) GE Hitachi Nuclear Energy (GEH), in partnership with Ontario Power Generation (OPG), SNC-Lavalinand Aecon, has signed a contract for the deployment of a BWRX-300 small modular reactor (SMR) at OPG’s Darlington New Nuclear Project site, marking the first commercial contract for a grid-scale SMR in North America. This groundbreaking agreement, through which GEH will provide the reactor design, encompasses a comprehensive range of project activities, including design, engineering licensing support, construction, testing, training and commissioning. Jay Wileman, President and CEO of GEH, stated, "This contract is an important milestone and solidifies our position as the leading SMR technology provider. We aim to deliver the first SMR in North America and, in doing so, lead the start of a new era of nuclear power that will provide zero-emission energy generation, energy security and energy reliability around the globe. We can’t express our appre...

KenGen Risks Losing Olkaria Geothermal Wells Over Licence Error

KenGen Risks Losing Olkaria Wells Over 18-Year Licence Blunder Kenya Electricity Generating Company (KenGen) faces a serious legal and operational risk at Olkaria after an error in the coordinates of its geothermal licence left part of the company’s wells, steam infrastructure and other assets outside its legally recognised area. The licensing mistake, made nearly two decades ago, remains unresolved despite the Ministry of Energy and Petroleum acknowledging the problem in 2017.  The dispute has raised questions about the security of KenGen’s investments, the government’s management of geothermal resources and the potential consequences for Kenya’s electricity supply. Olkaria is the country’s most important geothermal centre and accounts for the overwhelming majority of Kenya’s installed geothermal generation capacity.  Licence Error Exposes Strategic Assets The problem dates back to September 19, 2008, when the Ministry of Energy and Petroleum issued KenGen a licence covering ...

Djibouti Pays KenGen: $1M Offer on a Five-Year Geothermal Drilling Debt

Djibouti Pays KenGen: A $1 Million Offer on a Five-Year-Old Geothermal Drilling Debt Djibouti has finally moved to pay part of what it owes Kenya Electricity Generating Company (KenGen) for drilling work done near Lake Assal. The amount is small next to KenGen's balance sheet. What it says about selling geothermal drilling services across Africa matters a lot more. KenGen's latest annual report says Djibouti's state geothermal agency, the Office Djiboutien de Développement de l'Énergie Géothermique (ODDEG), has offered a first instalment of about $1 million (Sh129 million) against outstanding invoices of $2.13 million (Sh276.03 million), according to Business Daily. "ODDEG has acknowledged the debt and has proposed an initial payment of $1 million as the first instalment towards settlement," KenGen said in the report. KenGen is Kenya's largest power producer, with about 54% of the market. The Kenyan government owns 70% of the company and the public holds t...

Lithium Harvest Plans Alberta Geothermal Power and Lithium Project

Lithium Harvest’s Alberta Geothermal Project Could Combine Renewable Power and Domestic Lithium Production Lithium Harvest Holding A/S has signed a letter of intent with an unnamed geothermal development partner to establish a joint venture for an integrated geothermal power and lithium production facility in Alberta, Canada. At full nameplate capacity, the proposed project is expected to produce approximately 28,500 tonnes of lithium carbonate annually while generating 0.67 TWh of renewable electricity each year. The development would use a single geothermal resource to supply both baseload power and lithium-bearing brine for direct lithium extraction and refining.  A Dual-Output Geothermal Development The proposed Alberta facility reflects a growing effort to extract more value from geothermal resources than electricity generation alone. Traditional geothermal power projects produce electricity by bringing hot underground fluids to the surface. Depending on resource temperature a...

Corva and Oliasoft Connect Well Design With Real-Time Drilling

Corva and Oliasoft Build a Continuous Learning Loop for Smarter Well Construction Introduction Corva AI and Oliasoft have announced a strategic collaboration designed to connect well engineering, real-time drilling operations and post-well analysis through a bidirectional digital workflow. The integration links Oliasoft WellDesign with Corva’s Real-Time AI platform, creating a continuous information loop in which engineering plans guide field execution and drilling results improve future well designs.  The partnership addresses one of the persistent weaknesses in modern well construction: the separation between planning software and operational systems. Although operators generate large volumes of engineering and drilling data, those datasets often remain fragmented across departments, applications and reporting processes. The result is slower decision-making, repeated manual work and limited transfer of lessons from one well to the next. By connecting design assumptions with liv...

BLM Nevada Geothermal Lease Auction Boosts Renewable Energy Investment amid Solar Land Conflict

BLM’s Nevada Geothermal Lease Auction Signals Rising Competition for Federal Energy Land The Bureau of Land Management’s latest geothermal lease sale in Nevada attracted nearly $4.83 million in total receipts, highlighting growing investor interest in geothermal resources as electricity demand rises . The auction also exposed an increasingly important land-use conflict: several geothermal parcels overlap with proposed utility-scale solar projects, including NextEra Energy’s 1,000-megawatt Sawtooth Energy Center. The October 20, 2026, sale offered 83 parcels covering approximately 265,155 acres across 10 Nevada counties. Bidders placed offers on 60 parcels covering 186,641 acres, while 23 parcels received no bids. The results provide a new measure of competition for federal geothermal acreage in one of the United States’ most important geothermal states. Auction Results The Nevada auction attracted 32 registered bidders, of which 18 submitted at least one bid. Across the sale, bidders s...

Endurance Energy Tests World's First Subsea Geothermal Well at Axial Seamount

Endurance Energy Tests the World's First Subsea Geothermal Well: What the Axial Seamount Demonstration Really Proved What if geothermal energy did not need a power plant on land? What if electricity could be produced directly from the Earth's heat beneath the ocean, with generators sitting on the seafloor and sending power to coastal grids? On October 19, 2026, Seattle-based startup Endurance Energy announced a major step toward that idea. The company said it had drilled and completed the world's first subsea geothermal well and placed a 3-ton test power plant nearly a mile beneath the Pacific. It also reported net-positive electricity from heat at an active underwater volcano, according to its announcement on PR Newswire. The headline numbers are modest. The Adélie prototype produced more electricity than it used for about 8.7 seconds. During that time it delivered a median net output of about 2 kilowatts and a peak of 16.5 kilowatts. One detail matters more than any other...

Geiselbullach Geothermal Project Confirms 10 MW District Heating Capacity

Geothermal milestone at Geiselbullach: 10 MW of heat confirmed after successful second deep well test On 15 August 2026 the Geiselbullach geothermal project reached a pivotal technical milestone: performance testing of the second deep production well completed successfully, delivering a sustained flow of 90 liters per second of thermal water at 79–80 °C. These measured parameters translate into roughly 10 MW of usable thermal power for district heating, enough to replace a portion of heat currently supplied by the municipal waste-to-energy plant (AHKW) and to create headroom for expanding the regional district heating network. The result confirms the project’s technical assumptions and moves the scheme into system-integration and commissioning activities ahead of planned commercial deliveries for the 2027 heating season. This article explains the test results and their significance, outlines the technical and operational consequences, and places the Geiselbullach development in the bro...

Menengai Geothermal Project Delays Expose Kenya’s Broken Steam Supply Model

Menengai’s Broken Promise: How Kenya’s Geothermal Model Lost the Steam Thematic image of the Olkaria Geothermal Field  Kenya’s Menengai geothermal project was sold as a model of modern public-private partnership. The state would carry the difficult and expensive burden of geothermal exploration and drilling. Private power producers would then build, own and operate power plants. Geothermal Development Company would supply the steam; the independent power producers would convert it into electricity; Kenya Power would buy the output. On paper, the arrangement was elegant. In practice, Menengai has exposed a far more uncomfortable reality: Kenya’s public steam-supply model is not delivering the certainty it promised. Menengai Phase I was designed to produce 105 megawatts from three 35 MW plants. GDC’s own project page says the three plants were awarded to Globeleq Menengai Geothermal, Sosian Menengai Geothermal Power and OrPower Twenty Two under a build-own-operate structure. Yet the ...