Skip to main content

Just In

Exergy Gemini Turbine vs Ormat Ormega100: Geothermal Binary Power Comparison

TotalEnergies embarks on perfect underwater CO2 storage sites off the coast of Denmark



image source: (oilandgasdaily)

TotalEnergies, an oil and gas company, just secured two permits to search for the perfect spot to store millions of tonnes of CO2 in the North Sea. This area is a prime location for carbon storage, as the firm can utilize exhausted oil and gas wells, along with undersea aquifers, all connected by pipelines.

 The TotalEnergies permits cover 2,000 square kilometres, 250 km off the Danish coast and includes the Harald gas field, as well as other aquifers. The goal is to store as much as 5 million tonnes of CO2 by 2030, in an effort to reduce the environmental impact of polluting industries. 

TotalEnergies will hold an 80% stake and act as the operator, with a state-owned Danish firm holding the remaining 20%. This will be TotalEnergies' fourth North Sea project, with previous ventures in British, Dutch, and Norwegian waters.

Carbon capture is the process of capturing carbon dioxide emissions from industrial processes or power generation before they are released into the atmosphere. Here are some proven methods of carbon capture:


Post-combustion capture: This method captures CO2 emissions from flue gases produced during the burning of fossil fuels in power plants.


Pre-combustion capture: This method captures CO2 before combustion, by converting coal or natural gas into a mixture of hydrogen and CO2.


Oxyfuel combustion: This method involves burning fossil fuels in an atmosphere enriched with oxygen to produce a flue gas that is primarily composed of CO2, making it easier to capture.


Chemical looping: This method uses metal oxides to transfer oxygen from air to a fuel, producing a stream of CO2-rich flue gas that can be captured.


Direct air capture: This method involves using chemical processes to extract CO2 directly from the air and store it for later use or underground storage.


These are some of the proven methods of carbon capture currently being used or developed for commercial use. The choice of method depends on the specific industrial process or power plant, and factors such as cost, energy efficiency, and environmental impact.

source: (oilandgasdaily)

#Totalenergies #Carboncapture 

Comments

Popular posts from this blog

GA Drilling: Advanced Geothermal Drilling Technology, Deep Rock Innovation, and Clean Energy Financing

GA Drilling : Deep Drilling Technology, Financing, and Geothermal Scale-Up Image: A GA Drilling Bit GA Drilling is one of the more important technology companies in the geothermal sector because it is trying to solve a problem that has limited geothermal growth for decades: the cost, complexity, and risk of drilling deep wells in hard rock. Rather than operating a geothermal power plant itself, the company focuses on the drilling side of the value chain, developing technologies that can make deep geothermal wells faster, cheaper, and more reliable to build. That positioning gives it a different role from most geothermal developers, and it also makes it strategically significant for the future of clean baseload energy. The geothermal industry has always been constrained by subsurface uncertainty. Developers know where the heat is in a general sense, but they still must drill through high-temperature, abrasive, fractured, and often unpredictable rock to get there. In many projects, dril...

EGS Market Size and Investment Outlook

Enhanced Geothermal Systems (EGS) Market Size and Investment Outlook to 2034 Enhanced Geothermal Systems are at an inflection point. For years, EGS sat in the “promising but pre‑commercial” category of clean technologies, constrained by drilling cost, subsurface risk, and limited policy attention. That picture is now changing as next‑generation geothermal developers raise larger rounds, sign serious offtake agreements, and move projects from concept to execution.   At the same time, global demand for firm, low‑carbon power is rising faster than conventional geothermal can supply. Thermal plants are retiring, grids need 24/7 clean electricity, and policymakers are discovering that weather‑dependent renewables cannot carry the entire load alone. EGS is emerging as one of the few technologies capable of delivering baseload clean power using a resource available almost everywhere: deep, hot rock. Current EGS Market Size – Small but Strategic In absolute terms, the EGS market is s...

Exergy Gemini Turbine vs Ormat Ormega100: Geothermal Binary Power Comparison

Exergy Gemini Turbine vs Ormat Ormega100: Two Different Paths to Geothermal Scale image : a thematic view of a geothermal turbine "blade" Geothermal power is entering a new phase. Two of the most important announcements in the sector point to larger, more standardized, and more commercially viable binary geothermal systems: Exergy’s Gemini Turbine and Ormat’s Ormega100 . At first glance, both machines promise major gains in scale, but they are not trying to solve the same problem in exactly the same way. Gemini is built around a high-capacity radial outflow turbine architecture that can deliver up to 60 MWe per shaft, while Ormega100 is designed as a 100 MW binary surface power unit intended to accelerate enhanced geothermal system commercialization. For project developers, utilities, and data-center buyers looking for firm clean power, the comparison matters because it reveals two competing ideas about how geothermal should grow. Exergy is emphasizing turbine architectur...

EU Tripartite Energy Storage Agreement, EGEC and QHeat Drive 30–35 GW Storage Deployment, Geothermal Energy Storage, Flexible Renewable Integration, and Clean Energy Investment Opportunities

The new EU tripartite agreement on energy storage, with EGEC and QHeat among the signatories, gives you a strong “systems-level” angle to layer onto your California geothermal piece by showing how firm clean power and storage are being coordinated on both sides of the Atlantic. Image : UK First Geothermal power plant at United Dawn's by Enel Green Coordinated Clean Firm Power, How California’s Geothermal Push and Europe’s Energy Storage Tripartite Are Rewriting the Rules of the Grid California’s decision to fund geothermal exploratory wells and the EU’s first‑ever tripartite agreement on energy storage are two sides of the same strategic coin, both designed to deliver secure, flexible, and affordable clean electricity. While California is targeting next‑generation geothermal to close its “clean firm gap,” Brussels is rallying 22 Member States, industry, banks, and innovators around a shared pledge to add 30–35 GW of new storage capacity in just two years.Together, these moves sh...

Geothermal Engineering Limited (GEL): Deep Geothermal Technology, Financing, and UK Clean Energy Expansion

Geothermal Engineering Limited (GEL) : Technology, Financing, and Progress Image : Ryan Law is the C.E.O at GEL Geothermal Engineering Limited (GEL) is one of the UK’s most important geothermal developers, with a flagship deep-geothermal project at United Downs in Cornwall and a growing strategy that combines electricity, heat, and lithium extraction. It has also attracted a mix of private capital, public grants, and bank financing to move from exploration and drilling into commercial operations. Company overview GEL was incorporated in 2008 and is registered in Cornwall as a private limited company focused on electricity production, utility construction, and test drilling and boring. Its core mission is to use geothermal resources beneath the ground to support low-carbon power, heating, cooling, and ultra-low-carbon lithium production in the UK. The company presents itself as a lean specialist team built around geothermal engineering, geology, and community engagement capabilities. ...

Barito Renewables’ $5 Billion Bid for EDC Signals a New Power Move in Southeast Asia’s Geothermal Market

Indonesian Billionaire Prajogo Pangestu’s $5 Billion Geothermal Bet Could Reshape Philippine Clean Energy A major deal is drawing attention across Southeast Asia’s energy sector: Indonesian billionaire Prajogo Pangestu’s Barito Renewables Energy has made an unsolicited $5 billion offer to acquire Energy Development Corp. (EDC), the largest geothermal company in the Philippines. The proposal, while still non-binding and subject to due diligence and approvals, signals just how strategically important geothermal energy has become in the region’s clean power race. If completed, the transaction would bring together one of Indonesia’s most prominent energy investors and the Philippines’ biggest geothermal operator in a deal that could influence both corporate strategy and regional renewable energy development. Even without a final agreement, the offer alone highlights the rising value of geothermal assets at a time when governments and investors are searching for dependable, low-carbon power...

Enhanced Geothermal Systems (EGS) Induced Seismicity: Can We Engineer Earthquakes Safely?

Enhanced geothermal systems are one of the few realistic paths to firm zero carbon power at scale, but they work by deliberately changing stresses in the crust, so induced seismicity is not a bug; it is a built‑in consequence that we have to manage, not eliminate. Image: geothermal wells of power The real question is whether we can design and regulate EGS so that most earthquakes stay tiny and useful as a reservoir diagnostic, and rare felt events stay within a risk envelope society will accept, with clear rules on who pays when something still goes wrong. EGS and induced seismicity Enhanced geothermal systems increase permeability in hot but relatively tight rock by injecting fluid under pressure, which raises pore pressure and shifts effective stresses on pre‑existing fractures and faults. When those faults are close to failure, even modest pressure changes can trigger slip, generating induced seismic events that range from microquakes only instruments detect to felt earthquakes like...

Geothermal Project Finance Structuring: SPVs, Mezzanine Debt, Blended DFI Finance and Contingent Capital for Drilling Risk

Geothermal Project Finance Structuring: SPVs, Mezzanine Debt and Blended Capital for Drilling Risk Image : A depiction of a geothermal complete project  Geothermal power sits in an awkward place on the project finance spectrum. It behaves like long‑lived infrastructure once it’s operating, but it looks like frontier exploration during the early drilling phase. To build bankable deals in that environment, developers and investors have had to invent a toolkit of SPV structures, mezzanine drilling tranches, blended public–private finance and contingent instruments that allocate subsurface risk without blowing up returns. This is not just a technicality for lawyers and bankers. The way geothermal deals are structured determines whether otherwise viable resources ever reach financial close. It also shapes how much upside sponsors keep via GP carry, how quickly equity can recycle, and how development platforms position themselves in a crowded clean‑energy pipeline. Why geothermal is stru...

How AI-Powered Digital Twins Are Transforming Geothermal Reservoir Management

Geothermal Reservoir Digital Twins: How AI Is Transforming Reservoir Management Image : Thematic image of a geothermal heat pump Artificial intelligence and digital twins are quietly rewriting the playbook for geothermal reservoir management. They turn scattered subsurface data into living, predictive models that help operators boost output, cut drilling risk, and extend the productive time. How Geothermal Digital Twins Are Making Reservoirs Smarter, Safer, and More Profitable For decades, geothermal development has been constrained by one brutal fact: you can’t see 3 km underground. You infer, you model, you hope—and sometimes you drill into a dry or underperforming reservoir. AI‑powered geothermal digital twins change that equation by continuously updating subsurface models with real‑time data, making the invisible reservoir behave like a transparent, responsive system. In practice, geothermal digital twins are dynamic software replicas of wells, reservoirs, and surface facilities th...

The "Heat-as-a-Service" (HaaS) Business Model: Geothermal Without the CAPEX Nightmare

Heat-as-a-Service takes geothermal from a capital-intensive power project to a financeable, contract-based heat utility: instead of selling electrons, you sell stable, decarbonized heat under long-term contracts that match what industrial customers and investors actually want. Image: A thematic picture of a geothermal power plant By shifting risk and ownership away from end users and toward specialised developers and infrastructure capital, it can unlock geothermal in markets where electricity tariffs are low but demand for reliable, low-carbon process heat is strong. From kWh to “heat-as-a-service” Traditional geothermal projects earn revenue by selling electricity into a grid, often at wholesale prices that barely cover high up-front drilling and plant costs unless there is a feed-in tariff or premium.Many industrial users, however, do not need electricity; they need heat for processes like brewing, greenhouse climate control or pulp and paper production, and they currently buy that ...